Hp Drive Tray

Shop by Category

3,558 Results

A Definitive Guide to the HP Drive Tray

When you're trying to mount a SATA, IDE, or solid-state drive into your Hewlett-Packard machine, you often have to screw the drive into the drive rack. In most situations, this can be very inconvenient, especially if you'll need to remove the drive from time to time, which is why the HP hard drive caddy is so useful. With one of these HP drive trays, you can simply pinch two tabs or switch a lever to slide the tray in and out of its housing.

What types of machines can you find hard drive trays?

Not only is it common to find a hard drive tray in a desktop, but you can also find these in servers as well, which makes a lot of sense because server techs need to remove hard drives from these machines at a fairly common rate. Additionally, drive trays are also designed with specific server hardware in mind, so if you are running an HP server, you'll need a tray with a connector for their specific servers.

Do these hard drive tray models come in different sizes?

If you're looking for a new drive tray for your HP machine, you can expect to have to work with one of two specific sizes of tray:

  • HP 2.5 drive caddy: This is specifically designed to accommodate 2.5-inch drives, which can include SATA, IDE, and SSD drives.
  • HP 3.5 drive caddy: If you're planning on using a traditional hard drive for your Hewlett-Packard machine, then you'll need a drive tray that can accommodate it. A 3.5 HP hard drive tray can fit 3.5-inch drives of any type.
Do all HP hard drive caddies have connectors?

No, while some HP ProLiant generation 9 hard drive caddy models have a connector at the end to interface with HP hardware, not all are designed this way. In fact, HP hard drive caddy models just serve as racks that allow you to slide the tray in and out comfortably. These trays simply allow you to elicit data transfers via the IDE or SATA connector of the drive. Interestingly enough, in some cases there's no screwing in for these drives - the sides have protrusions that will connect with the holes in the side of the drive.

What computing applications can a drive tray be used for?

When computing, a drive tray can have many uses, including:

  • Easy drive swap-outs in a server environment.
  • As a means to switch out media drives in a standard home PC.
  • As a means to fit a smaller 2.5-inch mSATA solid-state drive into a 3.5-inch mounting bay.
Content provided for informational purposes only. eBay is not affiliated with or endorsed by Hewlett-Packard.