Surveillance Cables and Connectors Less Than 5 Feet
Having your home or business monitored properly can take stress and pressure off of you and provide tangible enhancements to your existing security measures. However, most surveillance packages are not sold with the cables, connectors, or adapters that you may need. It is therefore great to know what types of surveillance cables and connectors are available and how each kind can benefit you.What types of surveillance cables are available?
There are several cables used for surveillance that will measure less than 5 feet in length. Which of these cables and the accompanying connectors you will need will depend on the type of security system you have in mind. It may be helpful to familiarize yourself with some more common 5-foot cables and connectors on the market before you decide on which surveillance system to use. This will ensure that everything is compatible and runs smoothly.
- If you want a CCTV system that is relatively easy and straightforward, you can opt for a CCTV video power BNC cord. These cords come in various lengths to accommodate your needs and work to transmit a video signal from your surveillance equipment while acting as a power source. These cables are an option if your plan is to set up a great home security system with several surveillance devices in proximity to one another.
- An RG59 Coaxial cable will give you high-frequency signals that are shielded from both electromagnetic and outside source interference. The RG59 series of cables are also insulated from corrosion, making them a good option if you need to run some cables to outdoor environments.
- A closed circuit audio cable can run using the power directly from your CCTV surveillance system and is good if your goal is to pick up the faintest sounds or disturbances.
- If you have several pieces of similar surveillance equipment and wish to connect them to each other, a four-way cable may be a good option. Four-way cables seek to distribute power evenly among various surveillance devices while limiting the number of unique connections you must have for everything to work together.
- Other cables act as connectors with two different connection points at their ends. This allows such cables to switch connection types, such as BNC to RCA, and vice versa.
You will need the right type of connector on the end of your surveillance cables when you want to plug everything in and start it. Your primary concern is finding connectors that will work with the types of systems and cables you have, but you also want connectors that offer low interference. As the visual or audio signal travels along the cable, it may experience impediments in the signal. This impedance should be as low as possible to give you the results you need. Certain constant impedance connectors can provide you with the least interference as the signal travels to its destination.